Home Page › Forums › Modeling the Missouri Pacific, Texas & Pacific, etc › HO Scale › Building a Mopac GP-12 1065 (ex M-I RS-3) › Reply To: Building a Mopac GP-12 1065 (ex M-I RS-3)
Here’s a parts list for this model.
Details Associates LR1107 Alco lift rings
Details Associates 1012 Dual headlight Pyle conversion
Details West CF-142 36” cooling fans
Details Associates FA 2001 34” flat top fan
Custom Finishes by Bob Rzasa curved grab irons RS-2/3 205
Details West Spark Arrestors SA-124
Details Associates AH 1608 Leslie Air Horn
Details Associates SY 2208 pilot and steps (I’ll use the boxes for holding the air hoses in place).
Lift rings were added and the spark arrestors glued in place. I also reworked the front and rear platform handrails by removing the chain and drop steps and adding Evergreen.020 rod for the top railing and a 2” x 4” on the angles. One lesson learned is the crew cab is somewhat difficult to get off the carbody. I finally cut off the four tabs that held the cab on and it will be glued in place after I paint it and install the windows.
[attachment=2:1ds2jdlc]9DCAC4F1-BD32-4D49-B26B-E0129916AA53.jpeg[/attachment:1ds2jdlc][attachment=1:1ds2jdlc]B563653A-07BC-4BF1-A483-FB7481E0CB9B.jpeg[/attachment:1ds2jdlc][attachment=0:1ds2jdlc]C53D1E17-57C9-4A00-A18A-A7F796BAEE4E.jpeg[/attachment:1ds2jdlc]
