Home Page Forums Modeling the Missouri Pacific, Texas & Pacific, etc HO Scale MP HO scale Sedalia Battery Box-Caboose

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #5411
    John Garavaglia
    Participant

    Ryan Harris has designed these battery boxes…these will work on Sedalia Steel cabooses; as well as rebuilt/shopped WrightTrak models cabooses (KO&G)

    They represent the battery box upgrade with the steel strapping around it. You will have to trim the vertical strapping that was put on there to ensure side straps print ok.

    I have ordered them…and will post photos when they arrive. Measurements were obtained from a retired Sedalia Welded Caboose in So. Illinois (MP 13417).

    While these were mostly one piece doors with a hinge at the bottom..and a handle at the top…Ryan did three with the split door design…just in case we missed a version that was out there back in the “day”…

    Here’s the link.

    https://www.shapeways.com/product/PNVC24MSG/caboose-mp-sedalia-battery-box?optionId=60568359&li=ostatus

    #8068
    Joseph Berry
    Participant

    Tom,
    Thanks for the info…looking forward to your shots of the boxes.

    #8098
    John Garavaglia
    Participant

    Gary:

    The link has a photo of them on the sprue…and I’ll have them primed to enhance the detail on them.

    Been rather busy in September. My Dad passed away on Sept 8…and I’m his executor.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.