• This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #5326
    mopac
    Keymaster

    Started to model some covered hopper. Two MoPac cars are ready for weathering :

    #6673
    peggyrothschild
    Participant

    Very nice models. Are these from kits or did you have to decal them?

    #6674
    mopac
    Keymaster

    Thanks Charlie,

    these models are Proto2000 Kits, painted with Tru-Color “MP covered hopper gray” and lettered with Microscale 87-493 from photographs.

    #6720
    mopac
    Keymaster

    So, the eagle was put on backwards on the MP hopper?

    #6723
    mopac
    Keymaster

    That’s why I’m even taken aback, but so were the decals in the set of Microscale.

    Both in different direction.

    http://www.microscale.com/Merchant2/graphics/00000001/87493_224x350.jpg

    #6726
    elsaanderson820
    Participant

    All the freight cars I have seen, the eagle is pointing to the left.
    Only on the Loks is the eagle pointing to the right on one side.
    I count this as a very good job.

    If you put the wheels on, you can come run in my train. https://youtu.be/PWhk9paVr8o

    Careful, I started with two MP hoppers. Look where I ended!

    #6788
    madonnasuffolk30
    Participant

    On freight cars the eagle should always be facing to the right. I have contacted Microscale about the error and they acknowledged it. However I have seen one prototype locomotive that had the eagle facing the wrong way on the fireman side. Cars look great. I really like the CEI and the The Rock blue 4427s.

    The gray looks great also and will have to pick some up.

    Nate

    #6796
    mopac
    Keymaster

    Thank for the Info about the eagle.

    I have to change it.

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.