Home Page › Forums › Modeling the Missouri Pacific, Texas & Pacific, etc › HO Scale › Modeling a MoPac GP-12 1067 › Reply To: Modeling a MoPac GP-12 1067
January 20, 2019 at 5:11 pm
#9235
mahcr450
Participant
After some measurements, I drew a 3D model and printed the replacment tank in resin.
It’s difficult to see the detail in the clear resin but I was able to add the drain plugs to each side of the tank. I kept, and added the speaker holes but not sure if I’ll mount a speaker in the same spot.
