• This topic is empty.
Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #6255

    Does anyone have a photo or picture of the MR&BT’s Lead Belt SHortline Logo that would be suitable to use in artwork for decals?

    Gene S.

    #9413
    Gregg Laiben
    Participant

      Hi Gene,

      Here are a couple images collected over the years online. I do not recall the source, and cannot say whether they were considered official.

      [attachment=0:3bim1j4e]-_12.JPG[/attachment:3bim1j4e]
      [attachment=1:3bim1j4e]mrbt5.gif[/attachment:3bim1j4e]

      …gregg

      #9042

      Thanks Gregg

      #9045
      Charles Duckworth
      Participant

        Gene
        Here’s one from a Farmington newspaper ad and a shot off a gondola.

        [attachment=0:xq15v212]C09E9067-8B3E-4FB0-8F91-9D6FDA334A10.jpeg[/attachment:xq15v212][attachment=1:xq15v212]2A4C6DF6-6570-4857-857B-7AA975476B52.jpeg[/attachment:xq15v212]

        #8366
        Gregg Laiben
        Participant
          #7994
          Charles Duckworth
          Participant

            Greg
            Thanks for posting the red and white logo. The Missouri Pacific Historical Society will have a MR&BT Ry cap in the company store in the near future. Kevin Love will be working with our designer/supplier.

            Our minimum order of caps is 24 so start saving up your pocket change.

            Charlie

            #9435
            Gregg Laiben
            Participant

              Please put me down for one of the MR&BT hats Charlie – thanks!
              …gregg

              #9439
              Charles Duckworth
              Participant

                Greg
                Unfortunately the logo you posted wasn’t sharp enough to proceed with a cap. If you have the original pass can you scan it at a higher resolution?

                #9441

                24 caps minimum now? When it was 12 I could afford to jump start the GCL caps.

                #9445
                Gregg Laiben
                Participant

                  @cduckworth wrote:

                  Greg
                  Unfortunately the logo you posted wasn’t sharp enough to proceed with a cap. If you have the original pass can you scan it at a higher resolution?

                  Sorry, I wasn’t the winner of that auction – I ran across the listing and grabbed a screen capture.

                  …gregg

                Viewing 10 posts - 1 through 10 (of 10 total)
                • You must be logged in to reply to this topic.